Manufacturers of heating tablets talk about the characteristics of the use of electric heating tablets , friends who are interested come to see!
With the continuous development of science and technology, people's awareness of environmental protection continues to increase, and most things have begun to move towards low-carbon environmental protection. For example, the heating method in winter has also gradually changed. In the past, we used coal to heat collectively. Now many households begin to use heating panels for heating. This not only saves resources, but also adjusts the temperature according to the actual living conditions. Then, I will share with you the characteristics of the heating plate, so that you can have a better understanding of the heating plate.
1. The use of special heating wires and shielded alloy plates will never harm the human body by electromagnetic waves.
2. The safety factors of the heating plate and the temperature regulator meet international standards.
Users can control the temperature of the heating plate between 15 ℃ -60 ℃ according to the use area and temperature control needs. It can also control the laying of the heating plate in sections and compartments to achieve economical use.
3. The heating cable in the heating plate has overheating protection. When the temperature reaches 65 degrees, the power is automatically cut off, so that the covering does not reach the minimum ignition point, and there is no worry about fire.
4. No electromagnetic wave radiation, no noise, no odor, clean and sanitary. Eliminate the harmful effects of coal, firewood, carbon dioxide and other harmful gases on people. Particularly suitable for the elderly, children, duty, hospitals and other places.
5. Multi-specification, full-combination electric heating slab, to meet the different needs of users to the greatest extent. Easy to carry and disassemble, can be reused. Construction was at that time, and it was used at that time, and it took effect in 3 to 5 minutes.
6, long service life: the use of Korean special steel plate and heating wire, the main design life of up to 10 years.
The heating plate is installed with a thickness of 15mm, the power is 180W / square, there is a 65 ° overheat protector around 20 cm below the junction box, and the double layer protection of the temperature controller is more secure.
The above is an article introduced by the editor of the electro- silicone heating sheet manufacturer. If you want to know more or need an electric heating sheet, please call us for consultation!