Silicone heating belt is a special soft heating belt composed of nickel-chromium alloy wire and insulating material. It has high design power density, fast heating, high thermal efficiency and long service life.
In addition to heat tracing for general constant power bands, it can also be used in places where heating is required in some cases. Silicone heating belt has good waterproof performance. It can be used for heating, heat tracing and heat preservation of industrial equipment or laboratories in humid, non-explosive gas places. It can be directly wound on the surface of the heated part, and it is easy to install Safe and reliable.
The main purpose:
Applicable to severe cold regions, the main function of pipelines and solar energy special silicone electric heating belts are hot water pipe insulation, thawing, ice and snow, etc .; suitable for humid, non-explosive gas places, industrial equipment or laboratory pipes, tank grooves Pool heating, heat tracing and insulation. With high temperature, cold and aging resistance.
1. Maximum temperature resistance of insulation material: 300 degrees
2. Maximum operating temperature: 250 degrees
3. Power error: 8%
4. Insulation resistance: ≥5 MΩ
5. Compressive strength: 1500v / 5s
6. Withstand voltage: 6KV
7. Dimensions: maximum 1000mm * 1000mm, minimum 20mm * 25mm, lead length 150mm, the longest can be 15M.
8. Standard thickness: 1.8mm.
Instructions for use:
1. During installation, the silicone flat side of the heating belt should be close to the surface of the medium pipe and tank, and fixed with aluminum tape.
2. In order to reduce heat loss, additional insulation layer should be measured outside the heating zone.
3. Overlap winding installation is strictly prohibited to prevent overheating damage.
1. The heating wire is wound on the alkali-free glass fiber core frame. The main insulation is silica gel, which has good heat resistance and reliable insulation performance.
2, has excellent flexibility, can be directly wound on the device to be heated, good contact, uniform heating.
3. During installation, the flat side of the silicone tape of the electric heating belt should be close to the surface of the medium pipe and tank, and fixed with aluminum tape. In order to reduce heat loss, an additional insulation layer should be measured outside the electric heating belt.
4. According to the needs of the heated device, it can be bent and arbitrarily. The space is small, and the installation is simple and fast. The heating body is covered with silicone insulation. The tin-copper braid can prevent mechanical damage.
★ For detailed technical indicators and special requirements of this product, please contact us.
Shanghai Xionglei Environmental Protection Technology Co., Ltd.
Contact: Manager Jiang
Mobile phone: 18964514546
Address: 1758 Hualong Road, Huaxin Town, Qingpu District, Shanghai