Product overview of conventional silicone rubber heating belt:
Silicone rubber heating belt is a kind of particularly soft heating belt composed of nickel-chromium alloy wire and insulating material. It has high design power density, fast heating, high thermal efficiency and long service life.
In addition to heat tracing for general constant power bands, it can also be used in places where heating is required in some cases. Silicone rubber heating belt has good waterproof performance. It can be used for industrial equipment or laboratory pipes in humid, non-explosive gas places. The heating, heat tracing and insulation of tanks and tanks can be directly wound on the surface of the heated part, and the installation is simple ,Safe and reliable.
The main purpose:
Applicable to severe cold areas, the main functions of pipelines and solar energy special silicone rubber electric heating belts are hot water pipe insulation, thawing, ice and snow functions; suitable for humid, non-explosive gas places of industrial equipment or laboratory pipes, tanks Tank heating, heat tracing and insulation. With high temperature, cold and aging resistance.
1. Maximum temperature resistance of insulation material: 300 degrees
2. Maximum operating temperature: 250 degrees
3. Power error: 8%
4. Insulation resistance: ≥5 MΩ
5. Compressive strength: 1500v / 5s
6. Withstand voltage: 6KV
7. Dimensions: maximum 1000mm * 1000mm, minimum 20mm * 25mm, lead length 150mm, the longest can be 15M.
8. Standard thickness: 1.8mm.
Instructions for use:
1. During installation, the silicone rubber flat side of the heating belt should be close to the surface of the medium pipe and tank, and fixed with aluminum tape.
2. In order to reduce heat loss, additional insulation layer should be measured outside the heating zone.
3. Overlap winding installation is strictly prohibited to prevent overheating damage.
1. The heating wire is wound on the alkali-free glass fiber core frame. The main insulation is silicon rubber, which has good heat resistance and reliable insulation performance.
2, has excellent flexibility, can be directly wound on the device to be heated, good contact, uniform heating.
3. When installing, the flat side of the silicone rubber of the electric heating belt should be close to the surface of the medium pipe and tank, and fixed with aluminum tape. In order to reduce heat loss, an additional insulation layer should be measured outside the electric heating belt.
4. According to the needs of the heated device, it can be bent and arbitrarily. The space is small, and the installation is simple and fast. The heating body is covered with silicone insulation. The tin-copper braid can prevent mechanical damage.
★ For detailed technical indicators and special requirements of this product, please contact us.
Shanghai Xionglei Environmental Protection Technology Co., Ltd.
Contact: Manager Jiang
Mobile phone: 18964514546
Address: 1758 Hualong Road, Huaxin Town, Qingpu District, Shanghai